IBM C9010-022 - IBM AIX Administration V1 Exam
Page: 3 / 52
Total 258 questions
Question #11 (Topic: Topic 1)
A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and
the administrator is trying to determine why it cannot be used to reach any other system on
the network.He suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
the administrator is trying to determine why it cannot be used to reach any other system on
the network.He suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the adapter is using.
Answer: C
Question #12 (Topic: Topic 1)
A system that will be re-installed has the following characteristics:
[IBM-C9010-022-7.0/IBM-C9010-022-7_2.png]
If the following target_disk_data stanza is defined in the bosinst.data file used for the
install, which disk will be installed with the operating system?
target_disk_data:
LOCATION = 0006bf1c3d817913
SIZE_MB =
HDISKNAME = hdisk1
[IBM-C9010-022-7.0/IBM-C9010-022-7_2.png]
If the following target_disk_data stanza is defined in the bosinst.data file used for the
install, which disk will be installed with the operating system?
target_disk_data:
LOCATION = 0006bf1c3d817913
SIZE_MB =
HDISKNAME = hdisk1
A. hdisk0
B. hdisk1
C. hdisk2
D. hdisk3
Answer: C
Question #13 (Topic: Topic 1)
Name resolution is not working on a given LPAR. Considering the observed behavior and
configuration of/etc/resolv.conf, what is the most likely resolution?
[IBM-C9010-022-7.0/IBM-C9010-022-7_3.png]
configuration of/etc/resolv.conf, what is the most likely resolution?
[IBM-C9010-022-7.0/IBM-C9010-022-7_3.png]
A. Correct the definition of nameserver1.
B. Remove the domain line.
C. Verify the syntax in /etc/nelsvc.conf.
D. Move the search definition to the beginning of the file
Answer: B
Question #14 (Topic: Topic 1)
Given the following characteristics, tuning which resource will provide the greatest benefit?
CPU=80% busy
Physical Memory=90% used
Disks=80% busy
Network=80% used
Filesystemsare90%full.
CPU=80% busy
Physical Memory=90% used
Disks=80% busy
Network=80% used
Filesystemsare90%full.
A. Memory
B. Network
C. Disks
D. Filesystems
Answer: C
Question #15 (Topic: Topic 1)
What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up asa 'Mover Service Partition’.
Answer: A
