Cisco 200-601 - Managing Industrial Networking for Manufacturing with Cisco Technologies Exam
Page: 3 / 14
Total 67 questions
Question #11 (Topic: )
Given the CIA triad elements, which ensures first that the data is encrypted and secure,
second that the data is trustworthy, and third that the data is accessible by those who need
it?
second that the data is trustworthy, and third that the data is accessible by those who need
it?
A. CIA
B. ICA
C. ACI
D. CAI
Answer: A
Question #12 (Topic: )
Which statement is true regarding ProfiSAFE?
A. ProfiSAFE traffic must be carried on a network that is physically separated from automation traffic
B. ProfiSAFE relies on the error detection mechanisms of Ethernet and TCP/IP to determine if there are network errors
C. ProfiSAFE can be used in safety applications up to Safety Integrity Level 3 (SIL3)
D. ProfiSAFE is only used by ProfiBUS PA and ProfiBUS DA devices
Answer: C
Question #13 (Topic: )
Refer to exhibit. The administrator has configured the following device IP settings, but did
not keep track of which ports the devices were connected to. The administrator is able to
ping each device but needs to update the network documentation to include the switch and
interface where each device is connected. The administrator does not want to walk to each
device and switch to track down the information.
[Cisco-200-601-6.0/Cisco-200-601-9_2.png]
Which steps below would you execute in sequence to document the switch and interface
where each device is connected?
1. View the ARP table on L3SW1
2. View the ARP table on the administrator's station
3. View the ARP table on L2SW4
4. PING all the devices
5. View the MAC address table on all switches
6. View the MAC address table on the administrator's station
not keep track of which ports the devices were connected to. The administrator is able to
ping each device but needs to update the network documentation to include the switch and
interface where each device is connected. The administrator does not want to walk to each
device and switch to track down the information.
[Cisco-200-601-6.0/Cisco-200-601-9_2.png]
Which steps below would you execute in sequence to document the switch and interface
where each device is connected?
1. View the ARP table on L3SW1
2. View the ARP table on the administrator's station
3. View the ARP table on L2SW4
4. PING all the devices
5. View the MAC address table on all switches
6. View the MAC address table on the administrator's station
A. 2,4,5
B. 2,5,4
C. 4,3,6
D. 4,1,5
Answer: D
Question #14 (Topic: )
Refer to the exhibit.
[Cisco-200-601-6.0/Cisco-200-601-10_2.png]
NAT has been configured on the router 'GW' and the IP addresses of router 'GW' have
been configured properly. Users of PC1 and PC2 are able to ping the IP address
198.51.100.1 but are unable to reach any other IP addresses on the Internet. The ISP
confirmed that their configuration is correct. Which option would likely correct the problem?
[Cisco-200-601-6.0/Cisco-200-601-10_2.png]
NAT has been configured on the router 'GW' and the IP addresses of router 'GW' have
been configured properly. Users of PC1 and PC2 are able to ping the IP address
198.51.100.1 but are unable to reach any other IP addresses on the Internet. The ISP
confirmed that their configuration is correct. Which option would likely correct the problem?
A. ip access-list extended ACL_OUTBOUND permit ip 10.1.1.0 0.0.0.255 any interface Ethernet1 ip access-group ACL_OUTBOUND out
B. interface Ethernet1 ip nat outside
C. interface Ethernet0 ip nat inside
D. ip route 0.0.0.0 0.0.0.0 198.51.100.1
Answer: D
Question #15 (Topic: )
Refer to the exhibit.
[Cisco-200-601-6.0/Cisco-200-601-11_2.png]
What issue does this topology present for the represented traffic flow?
[Cisco-200-601-6.0/Cisco-200-601-11_2.png]
What issue does this topology present for the represented traffic flow?
A. Standard Produce/Consume traffic is not suitable for an 802.11 wireless environment.
B. Only one of the Work Group Bridges can transmit at a time, because 802.11 is half duplex.
C. The Converged Plant-wide Ethernet best practices for 802.11 wireless don't allow for PAC to PAC traffic.
D. I/O control traffic should utilize the 2.4 GHz band based on best practices.
Answer: B
