HPE6-A85 Exam - Free HP Questions and Answers

Question #1 (Topic: Exam A)

You need to troubleshoot a CX 6200 4-node VSF stack switch that fails to boot correctly. Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.

A. Conductor mgmt port using SSH B. Member 2 RJ-45 console port C. Conductor USB-C console port D. Member 2 switch mgmt port

Answer: C

Question #2 (Topic: Exam A)

What does the status of “ALFOE” mean when checking LACP with “show lacp interfaces”?

A. LACP is working with no problems. B. LACP is not configured on the peer side. C. LACP is a synchronizing process. D. The interface on the local switch is configured as static-LAG.

Answer: B

Question #3 (Topic: Exam A)

Describe the purpose of the administrative distance.

A. The higher administrative distance is preferred. B. The administrative distance is used as a trust rating for route entries. C. The administrative distance for a static route is 10. D. Routes learned via external BGP have a higher administrative distance than routes learned via OSPF.

Answer: B

Question #4 (Topic: Exam A)

What is indicated by a solid amber radio status LED on an HPE Aruba Networking AP?

A. The radio is working the 5 GHz band only. B. The radio is enabled in monitor or spectrum analysis mode. C. The radio is working in mesh mode. D. Not enough PoE provided from the switch to power both radios of the AP.

Answer: D

Question #5 (Topic: Exam A)

The customer requires two CX 6200F 48G switches to be connected to each other with a distance of 80m/252ft between wiring closets. Switches need to have reservation for VSF expansion with ring topology in each cabinet.
What is a valid configuration for a redundant link-aggregation port configuration?

A. Ports 1/1/1 and 1/1/2 for LAG B. Ports 1/1/49 and 1/1/50 with SFP28 for LAG C. Ports 1/1/51 and 1/1/52 with SFP+ for LAG D. Ports 1/1/47 and 1/1/48 for LAG

Answer: B

HP HPE6-A85 - HPE Network Campus Access Associate Exam