HP HPE0-V14 - Building HPE Hybrid IT Solutions Exam
Page: 3 / 26
Total 128 questions
Question #11 (Topic: Single Topic)
What should you configure to limit the scope of broadcast domains in an Ethernet network?
A. Trunks
B. VSAN
C. Static ARP
D. VLAN
Answer: D
Question #12 (Topic: Single Topic)
What is an access port on an Ethernet switch?
A. A port that carries FCP frames inside the network
B. A port that carries multiple VLANs
C. A port that is connected to an FCF
D. A port that carries untagged frames inside the network
Answer: D
Question #13 (Topic: Single Topic)
DRAG DROP
A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switches.
Match the fan tray option with the airflow direction.
Select and Place:
A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switches.
Match the fan tray option with the airflow direction.
Select and Place:
Answer: 
Question #14 (Topic: Single Topic)
You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
✑ Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and
high temperature fan kit
✑ HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
✑ Two SN3000B FC Switches
Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?
✑ Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and
high temperature fan kit
✑ HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
✑ Two SN3000B FC Switches
Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?
A. HPE NinjaSTARS
B. HPE One Configuration Advanced
C. HPE OneView Advanced
D. HPE SPOCK
Answer: D
Question #15 (Topic: Single Topic)
A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be
aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?
aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?
A. Switch A: Active; Switch B: Active
B. Switch A: Active; Switch B: Passive
C. Switch A: Passive; Switch B: Passive
D. Switch A: Passive; Switch B: Active
Answer: C
