Page: 1
/ 7
Total 97 questions
A customer needs to create a VMware HA cluster.
Which component is required for this installation?
- A. VMkernel port for HA
- B. vMotion configured
- C. deduplication enabled
- D. shared datastore
Answer : D
Reference:
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.avail.doc/GUID-4BC60283-B638-472F-B1D2-1E4E57EAD213.html
A customer plans to deploy VMware HA cluster using the Hypervisor Cluster Profile feature of OneView.
What must the customer consider when configuring the HA cluster?
- A. The HA cluster can be enabled only on the nodes with vSAN enabled
- B. The HA cluster must have extra computer resources available as failover capacity
- C. The HA cluster can coexist with a DRS cluster if mixed CPU architecture is used
- D. The HA cluster can be configured only when all nodes are exactly the same
Answer : B
Reference:
https://www.vmware.com/pdf/vmware_ha_wp.pdf
An integrator is modifying the network uplink configuration of a Synergy environment that uses HPE Synergy 40Gb F8 Switch Modules for connectivity.
What must the integrator do to make the necessary modifications?
- A. Connect to the switch module using CLI and run the necessary configuration commands
- B. Connect keyboard, monitor, and mouse to the Frame Link module, and run the network configuration wizard
- C. Connect to HPE OneView running on the Composer module to modify the Logical Interconnect Group (LIG) configuration
- D. Connect to the end-of-row (EoR) switches, and push the configuration to the switch modules
Answer : B
What is the main difference between HPE SimpliVity 2600 and HPE SimpliVity 380?
- A. HPE SimpliVity 380 is shipped in 5-node cluster configuration, while SimpliVity 2600 offers flexible expanding
- B. HPE SimpliVity 380 integrates with Hyper-V only, while HPE SimpliVity 2600 supports any virtualization platform
- C. HPE SimpliVity 380 is licensed per virtual machine, while HPE SimpliVity 2600 is licensed per capacity
- D. HPE SimpliVity 380 uses hardware deduplication, while HPE SimpliVity 2600 uses software deduplication
Answer : D
A customer needs a Synergy solution to meet the following requirements:
✑ Acts as a master module in a multiple frame logical fabric
✑ Provides advanced Ethernet switching features
✑ Managed by the network team
✑ Supports 10Gb downlinks to compute modules
✑ 40Gb uplinks to core switches
Which interconnect module should the integrator use?
- A. Mellanox SH2200 Switch Module
- B. HPE Synergy 10Gb/40Gb Pass-Thru Modules
- C. HPE Synergy 40Gb F8 Switch Module
- D. HPE Virtual Connect SE 40Gb F8 module for HPE Synergy
Answer : D
Reference:
https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815258.pdf
A Synergy integrator is creating a network that needs to be connected from the Virtual Connect SE 40Gb F8 module to a Fibre Channel (FC) Switch.
Which network type should the integrator select during the network creation task?
- A. Ethernet
- B. FC over iSCSI
- C. FC over Ethernet
- D. FC
Answer : D
Reference:
https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04815258.pdf
A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server by Image Streamer is not available.
Which OS build plan managed by HPE OneView for vCenter Server can the customer use?
- A. iLO Virtual Media-Based Deployment
- B. PXE-Based Deployment
- C. iLO Federation-Based Deployment
- D. ICsp-Based Deployment
Answer : A
Reference:
https://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-a00081761en_us-1.pdf
(72)
A customer is expanding its Synergy environment from one rack with a 3-frame master/satellite configuration to five racks (15 Synergy Frames) with identical hardware configurations.
What must the integrator do to perform this Synergy expansion?
- A. Create new Logical Enclosure (LE), Logical Enclosure Group (LIG), and Enclosure Group (EG) for each rack
- B. Create a new Logical Enclosure (LE) for each rack using existing templates
- C. Re-home the Logical Enclosure (LE) using the edited Enclosure Group (EG) and Logical Interconnect Group (LIG)
- D. Perform hardware discovery from the console, and copy the Logical Enclosure (LE)
Answer : B
An integrator is validating a Synergy solution configuration for a customer who requires connectivity to existing SAN switches. The interconnect modules selected are HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy.
Which component must be in the configuration to meet this requirement?
- A. HPE Synergy 8Gb FC License Upgrade
- B. HPE Synergy 10Gb Interconnect Link Module
- C. HPE B-series with S-channel aggregation
- D. HPE Synergy 20Gb Interconnect Link Module
Answer : D
A customer needs an integrator to add HPE 3PAR StoreServ to the HPE Composer. When the integrator tries to add it, they get an error and 3PAR is not added.
What should the integrator check that may be causing this error?
- A. if HPE 2PAR StoreServ Web Services API Server is enabled
- B. if storage integration plug-in is enabled on the HPE Composer
- C. if HPE 3PAR StoreServ array has an integration licenses applied
- D. if at least one virtual domain is created on a 3PAR array
Answer : B
Refer to the exhibit.
An integrator needs to create a volume on the FC_r6 CPG using HPE Composer, but the CPG is not available for provisioning. The integrator checked the Storage
Pools section, and the CPG is visible.
What must the integrator do to enable volume provisioning on this CPG?
- A. Select this CPG in the HPE Composer, select Edit from the Action menu, and change the CPG state to Managed
- B. Navigate to the Storage Systems section in the HPE Composer, select the 3PAR array, and re-import required CPG
- C. Login to the SSMC and add the HPE Composer certificate for the CPGs which are in the Discovered state
- D. Login to the HPE SSMC and remove the read only parameter for this CPG
Answer : D
A customer wants to implement HPE Global Dashboard for their environment based on HPE Synergy and HPE SimpliVity nodes.
What must an integrator be aware of when deploying HPE Global Dashboard for this customer?
- A. HPE Global Dashboard agent must be installed on HPE SimpliVity nodes
- B. The Single Sign-On feature is not supported for HPE SimpliVity nodes
- C. HPE SimpliVity nodes must be licensed within HPE Global Dashboard
- D. Only HPE SimpliVity 380 is supported because of the OmniStack hardware card
Answer : B
HOTSPOT -
A customer discovered performance issues with one of the volumes used by an application.
An integrator recommended changing the RAID level for this volume from RAID6 to RAID5 by moving this volume to a different CPG.
Click the option that will start this operation.
Hot Area:
Answer :
Reference:
https://www.3parug.com/viewtopic.php?f=18&t=2627
A customer complains about the database performance running on the HPE Synergy 480 compute node. To solve that problem, an integrator has to install the maximum memory in this compute node.
What else does the integrator need to do to allow the SY480 Gen10 to see all the memory modules?
- A. Add a second processor
- B. Install the Synergy Premium Backplane option
- C. Install NVDIMM memory
- D. Install a Memory Expansion Kit
Answer : A
Reference:
https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00026274en_us
30 days access 