Dell DES-1721 - Specialist – Implementation Engineer, SC Series Exam Exam
Page: 3 / 30
Total 147 questions
Question #11 (Topic: Topic 1)
A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O usage of individual drives be viewed?
A. Hardware > Disks > [disk folder] > [disk number]
B. Charting > Disks > [disk folder] IO Charts
C. Charting > Disks > [disk folder] > [disk number]
D. Hardware > Disks > [disk folder]
Answer: A
Question #12 (Topic: Topic 1)
A company is using an SC4020 array and the storage administrator wants to expand the available capacity by adding 92, 3.5ג€ disk drives. Which expansion
enclosure(s) can be used to meet the demand?
enclosure(s) can be used to meet the demand?
A. 1x SC280 drive bay
B. 2x SC180 drive bays
C. 4x SC220 drive bays
D. 8x SC200 drive bays
Answer: D
Question #13 (Topic: Topic 1)
You have implemented two SC Series systems at a customer site. The Dell Storage Manager (DSM) Suite has been installed on a Microsoft Windows server. Both
Storage Centers have been installed and added to the DSM. However, several days after the installation, the customer is only able to see one Storage Center in
the DSM GUI.
Which recommended action will correct this issue?
Storage Centers have been installed and added to the DSM. However, several days after the installation, the customer is only able to see one Storage Center in
the DSM GUI.
Which recommended action will correct this issue?
A. Check the network connections to the missing Storage Center
B. Reinstall the DSM including the database
C. Connect the DSM to the Data Collector
D. Restart the missing Storage Center
Answer: D
Question #14 (Topic: Topic 1)
What is the maximum number of disks that can be supported by an SC4020 running SCOS 6.6.4 or later?
A. 120
B. 128
C. 192
D. 196
Answer: D
Question #15 (Topic: Topic 1)
You need to set up the iDRAC IP address on an SC Series controller with the following details:
✑ IP address 192.168.0.160
✑ subnet mask 255.255.255.0
✑ gateway 192.168.0.1
Which commands should be used to complete this task?
✑ IP address 192.168.0.160
✑ subnet mask 255.255.255.0
✑ gateway 192.168.0.1
Which commands should be used to complete this task?
A. ifconfig inet set eth0 ip 192.168.0.160 ifconfig inet set eth0 netmask 255.255.255.0 ifconfig inet set eth0 gateway 192.168.0.1
B. ifconfig inet set eth1 ip 192.168.0.160 ifconfig inet set eth1 netmask 255.255.255.0 ifconfig inet set eth1 gateway 192.168.0.1
C. controller ipconfig set eth0 ip 192.168.0.160 controller ipconfig set eth0 netmask 255.255.255.0 controller ipconfig set eth0 gateway 192.168.0.1
D. platform bmc set ip 192.168.0.160 platform bmc set netmask 255.255.255.0 platform bmc set gateway 192.168.0.1
Answer: D
