Cisco 300-110 - Designing Cisco Wireless Networks (WLSD) Exam
Page: 1 / 12
Total 58 questions
Question #1 (Topic: Topic 1, Wireless Site Survey
)
An engineer must design a new wireless network for a hospital. The customer requires that all non-802.11 devices be included in the final design.
Which approach meets the requirements?
Which approach meets the requirements?
A. Perform an over-the-air packet capture using an AP.
B. Capture Radiotap headers with a protocol analyzer.
C. Perform a Layer 1 sweep using a spectrum analyzer.
D. Capture Layer 2 MAC headers with a AirPcap WLAN card.
Answer: C
Question #2 (Topic: Topic 1, Wireless Site Survey
)
An engineer is designing a wireless network in a historic building that has large rooms and ornate wall coverings.
Which approach must be considered first when placing access points?
Which approach must be considered first when placing access points?
A. RF coverage
B. cell overlap
C. RF interference
D. aesthetics
Answer: D
Question #3 (Topic: Topic 1, Wireless Site Survey
)
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP, with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs.
Which strategy will reduce the negative impact of the design?
Which strategy will reduce the negative impact of the design?
A. Increase the Tx power on incorrectly surveyed APs.
B. Deploy the specified APs per area type.
C. Deploy unsurveyed APs to the design.
D. Resurvey and adjust the design.
Answer: D
Question #4 (Topic: Topic 1, Wireless Site Survey
)
An engineer is designing a high-density WLAN that must support 100 concurrent users with 100 Mbps throughput consistently. The design allows for 20 Mbps per cell and per channel on the 5 GHz band.
How many channels must the design use to provide 1 Mbps per user prior to RF overhead?
How many channels must the design use to provide 1 Mbps per user prior to RF overhead?
A. 5
B. 10
C. 15
D. 20
Answer: A
Question #5 (Topic: Topic 1, Wireless Site Survey
)
A consulting engineer plans a brownfield survey to expand library coverage for a large university. The principal network usage in the library would be:
casual web browsing
printing
file sharing
device backup activities
What is the average bidirectional throughput rate limit per client that must be applied to the design to be sufficient to meet the requirements?
casual web browsing
printing
file sharing
device backup activities
What is the average bidirectional throughput rate limit per client that must be applied to the design to be sufficient to meet the requirements?
A. 500 Kbps
B. 1 Mbps
C. 2-10 Mbps
D. 10-50 Mbps
Answer: C
