Cisco 200-401 - Managing Industrial Networks with Cisco Networking Exam
Page: 1 / 13
Total 64 questions
Question #1 (Topic: Topic 1)
Exhibit:
[Cisco-200-401-7.0/Cisco-200-401-3_2.png]
Refer to the exhibit. Which port should a PLC with IP address 192.168.3.65 be plugged into
in order to communicate to the rest of the network?
[Cisco-200-401-7.0/Cisco-200-401-3_2.png]
Refer to the exhibit. Which port should a PLC with IP address 192.168.3.65 be plugged into
in order to communicate to the rest of the network?
A. FastEthernet1/1
B. FastEthernet1/2
C. FastEthernet1/3
D. FastEthernet1/4
E. FastEthernet1/5
Answer: C
Question #2 (Topic: Topic 1)
What are two benefits of a star network topology? (Choose two.)
A. Disruption of the entire network is not required when adding new machines.
B. Any problem which leaves the network inoperable can be traced to the central hub.
C. This network type requires less cable as compared to linear bus topology.
D. The performance of one of the numerous nodes cannot reflect on the performance of other nodes.
E. The performance of the entire network is directly dependent on the performance of the hub.
Answer: A,B
Question #3 (Topic: Topic 1)
Which of the following correctly pairs the dotted decimal subnet mask with the correct
number of binary bits that represent the subnet mask?
number of binary bits that represent the subnet mask?
A. 255.255.255.192 and /25
B. 255.255.255.248 and /28
C. 255.255.255.224 and /26
D. 255.255.255.248 and /27
E. 255.255.255.240 and /28
F. 255.255.255.240 and /16
Answer: E
Question #4 (Topic: Topic 1)
A small manufacturing company has a Class C network address on the plant floor and
needs to create five subnets, each accommodating 25 endpoints. Which subnet mask
needs to be configured?
needs to create five subnets, each accommodating 25 endpoints. Which subnet mask
needs to be configured?
A. 255.255.240.0
B. 255.255.255.128
C. 255.255.255.192
D. 255.255.255.224
E. 255.255.255.240
F. 255.255.255.248
Answer: D
Question #5 (Topic: Topic 1)
Exhibit:
[Cisco-200-401-7.0/Cisco-200-401-5_2.png]
Which two statements are correct for a safe wiring installation to the terminal block of the
switch or endpoint? (Choose two.)
[Cisco-200-401-7.0/Cisco-200-401-5_2.png]
Which two statements are correct for a safe wiring installation to the terminal block of the
switch or endpoint? (Choose two.)
A. Insert a green ground wire into the terminal block that is marked RT for return.
B. Verify that DC power is live and within 24 VDC voltage range before starting wiring.
C. Verify that the DC power circuit includes an overcurrent protective device that limits the DC current to 5 A.
D. Because this is a low-voltage DC circuit, anyone can install this wiring without electrical training or qualifications.
E. Connect the positive 24 VDC conductor to the V terminal and connect the negative 24 VDC return wire to the RT terminal.
F. A ground wire can optionally be connected to the screw terminal on the front of the switch.
Answer: C,E
