VMware Certified Professional on vCloud v6.0 (VCPC510)

Page:    1 / 17   
Total 250 questions

  • A. External Direct Network
  • B. Edge Gateway Network
  • C. Org vDC Network in isolation mode
  • D. Org vDC Network in fenced mode


Answer : D

How should an administrator prevent new virtual machines from being created or powered on inside a Provider vDC?

  • A. Place hosts into maintenance mode in vCenter.
  • B. Disable storage for the Provider vDC.
  • C. Disable the Provider vDC.
  • D. Place the Provider vDC in maintenance mode.


Answer : C

A network pool with a network limit of 1000 has 985 networks deployed. Performance has decreased on all of the vApp networks.
What is a possible contributing factor to this issue?

  • A. The wrong allocation model has been configured.
  • B. There are not enough port groups.
  • C. The port group is set to ephemeral binding.
  • D. The MTU is configured incorrectly.


Answer : D

Which configuration wizard allows you to set the highest supported hardware version for virtual machines?

  • A. Creating Provider VDC
  • B. Creating Organization
  • C. Creating Org VDC
  • D. Creating vAPPs


Answer : A

It has been discovered that nearly 90% of the allocated space for an Org vDC is in use.
You have been tasked to increase the amount of storage to 200GB.
Where would you accomplish this?

  • A. Properties of the Org VDC. Select Storage Tab and increase to 200GB.
  • B. Storage Profile in Org vDC and increase to 200GB.
  • C. Storage Policies in Org vDC and extend storage 200GB.
  • D. Allocation tab under Provider VDC and increase to 200GB.


Answer : A

The vCloud Director agent on an ESX/ESXi host cannot be contacted, which has rendered the host unusable in vCloud Director. What's the first step you should take to resolve the issue?

  • A. Repair the host
  • B. Prepare the host
  • C. Restart the host
  • D. Disable lock-down mode on the host.


Answer : A

You've been asked to merge two provider vDCs. What steps would you take to accomplish this?

  • A. Right-click the Provider vDC and select Merge With then choose a second Provider vDC
  • B. Create a new Provider vDC. Right-click the new provider vDC
  • C. Right-click the Provider VDC and choose Add New vDC
  • D. Add resources to a newly created vDC, then delete each of the old vDC's.


Answer : A

Using vCloud Director, what is the first step to prevent VMs from being deployed on an
ESXi host?

  • A. Disable the ESXi host.
  • B. Unprepare the ESXi host.
  • C. Delete the ESXi host.
  • D. Remove the ESXi host.


Answer : A

A vCloud Service Provider is attempting to monitor a vCloud implementation with a third party utility. The utility is not able to communicate with the VMs over the vApp Network.
Firewall rules on the vShield Edge device are set correctly.
Why is communication unavailable?

  • A. IP Masquerading rules are not set.
  • B. NAT is not automatically assigned.
  • C. Static routing is not enabled.
  • D. DHCP is not scoped properly.


Answer : A

An administrator is unable to connect to the Internet from within the cloud and suspects a firewall setting is causing the issue.
Which troubleshooting step should the administrator take first?

  • A. Open Edge Gateway Services for the External Network
  • B. Open Edge Gateway Services for the Edge Gateway External Organizational network
  • C. Open Edge Gateway Services for the Edge Gateway
  • D. Open Edge Gateway Services for the External Direct Organizational network


Answer : C

Where must an administrator place sysprep files in order for Guest OS Customizations to work on all supported versions of Windows?

  • A. On the VM during vApp creation.
  • B. On the vCD management cluster.
  • C. In a specific location on all vCD Cells.
  • D. In a specific location on the vCenter Servers.


Answer : C

What must occur before NAT Mapping can be enabled?

  • A. IP Masquerading must be disabled on the External Direct Network.
  • B. An external IP must be assigned to the External Direct Network.
  • C. An external IP must be assigned to the External Routed Network.
  • D. IP Masquerading must be disabled on the External Routed Network.


Answer : C

An administrator is troubleshooting an issue with a vShield Edge device. The administrator locates the following log messagE.
Oct 13 16:36:00 172.20.11.201 vse-097dec69-d600-49b6-8dd6-5f4406ab2248 kernel:
DROP IN= OUT=intif SRC=192.168.210.102 DST=192.168.110.4 LEN =64 TOS=0x00
PREC=0x00 TTL=61 ID=0 PROTO=ICMP TYPE=8 CODE=0 ID=2351 SEQ=0 MARK=0x2
Based on the log information, how can the administrator determine which vShield Edge device created the log entry?

  • A. The DST IP address is the vShield Edge device.
  • B. The vse address (vse-097dec69-d600-49b6-8dd6-5f4406ab2248) is the name of the vShield Edge device in the vSphere Client.
  • C. The SRC IP address is the vShield Edge device.
  • D. The vse address (vse-097dec69-d600-49b6-8dd6-5f4406ab2248) is associated with the vShield Edge device in the vSphere Client.


Answer : D

An author needs to create a configuration that will modify certain aspects of each VM when deployed.
Where can the Guest OS Customization tab be found?

  • A. In the properties of a vApp Template.
  • B. In the properties of a VM within a deployed vCloud vApp.
  • C. In the properties of a deployed vCloud vApp.
  • D. In the properties of a VM within a vApp Template.


Answer : B

Which naming convention is used by vShield Edge devices that control fencing for a vApp network?

  • A. They are named after the vApp network.
  • B. They are named after the external network.
  • C. They are named after the network pool.
  • D. They are named after the Organization Network.


Answer : A

Page:    1 / 17   
Total 250 questions