VMware Certified Professional 5 - Data Center Virtualization Delta Exam v6.1 (VCP550D)

Page:    1 / 18   
Total 270 questions

Which two statements are true regarding a new vSphere deployment that is using software
FCoE boot from SAN? (Choose two.)

  • A. Multi-pathing options must be configured by the vmkernel after boot.
  • B. The adapter must support iBFT or UEFI.
  • C. The adapter must support FBFT or FBPT.
  • D. Multi-pathing options must be configured in the Boot ROM.


Answer : A,C

Which feature requires an administrator to configure an RDM with Virtual Compatibility
Mode?

  • A. vMotion
  • B. Virtual Machine Snapshots
  • C. High Availability
  • D. N-port ID Virtualization


Answer : B

A virtual machine has the following configuration:
Thin provisioned virtual disks
The VMFS datastore on which it resides is on a thin provisioned LUN.
The storage array is VAAI-enabled.
What is the behavior of the virtual machine when it encounters an out-of-space condition?

  • A. It is suspended.
  • B. It is gracefully shut down.
  • C. It is powered off.
  • D. It is converted to space-efficient sparse.


Answer : A

What should an administrator do to configure multi-pathing using software iSCSI?

  • A. Bind the VMkernel ports to the software iSCSI initiator
  • B. Configure Zoning between the hosts and SAN switches
  • C. Configure NIC teaming on the associated uplinks
  • D. Ensure jumbo frames are enabled end-to-end


Answer : A

A vSphere administrator observes a problem with the Virtual SAN Cluster Setting as shown:
-- Exhibit --
-- Exhibit --
Which action should the administrator take on the vmkernel portgroup on all hosts used by
Virtual SAN cluster to resolve this problem?

  • A. Select the Virtual SAN traffic option
  • B. Increase the MTU value
  • C. Change the DNS server address
  • D. Increase the Port Speed


Answer : A

Which statement is true about the hardware configuration for ESXi hosts participating in a virtual SAN?

  • A. The hosts must have identical hardware.
  • B. Each host must have at least one Solid State Drive (SSD).
  • C. The hosts must have network attached storage.
  • D. Each host must have a RAID Controller.


Answer : B

An administrator has configured a vSphere 5.5 test environment to evaluate the Virtual
SAN feature using Automatic Mode Disk Groups. The administrator needs to disable the
Virtual SAN cluster while preserving the virtual machines running on that cluster.
The administrator has already installed a vSphere 5.5 Client on a Windows 7 desktop and also has access to the vSphere 5.5 Web Client.
What should the administrator do to disable the Virtual SAN?

  • A. Use Storage vMotion to migrate the virtual machines to another datastore then use the vSphere 5.5 Client to disable the Virtual SAN.
  • B. Use Storage vMotion to migrate the virtual machines to another datastore then use the vSphere 5.5 Web Client to disable the Virtual SAN.
  • C. Use the vSphere 5.5 Client to disable the Virtual SAN, which will automatically migrate the virtual machines via the Storage DRS feature.
  • D. Use the vSphere 5.5 Web Client to disable the Virtual SAN, which will automatically migrate the virtual machines via the Storage DRS feature.


Answer : B

A vSphere administrator has created a Virtual SAN Cluster with Automatic Mode Disk
Groups. The cluster includes three ESXi hosts contributing one SSD and six SAS disks each. The administrator has four new ESXi hosts that boot from a fiber channel array and have no local disks attached. These four new hosts need additional shared storage but there is insufficient space on the fiber channel array. The hardware budget is limited.
What can the administrator do to provide the needed storage for the lowest cost?

  • A. Add the four new hosts to the Virtual SAN Cluster and use the existing storage in the cluster.
  • B. Add an SAS RAID controller to each of the new hosts. Attach one SSD and six SAS disks to each RAID controller and then add the four hosts to the Virtual SAN cluster.
  • C. Add the four new hosts to the Virtual SAN Cluster and contribute the fiber channel disks to the Virtual SAN.
  • D. Add the four new hosts to the Virtual SAN Cluster and change to Manual Mode Disk Groups.


Answer : A

A customer needs a datastore to be seen across multiple vSphere clusters with applications inside of the virtual machines that must detect the physical characteristics of the storage device.
Which type of virtual disk meets this requirement?

  • A. A virtual disk on a VMFS datastore
  • B. A raw device mapped disk in virtual compatibility mode
  • C. A raw device mapped disk in physical compatibility mode
  • D. A virtual disk on an NFS datastore


Answer : C

The current block size of a datastore in VMFS3 is 4MB. An administrator needs to upgrade the datastore to VMFS5 and wants to change it to 1MB block size.
Which action should the administrator take?

  • A. Upgrade the datastore to VMFS 5. Select the 1MB block size option during the upgrade.
  • B. Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore, then delete the VMFS3 datastore.
  • C. Upgrade the datastore to VMFS5. Use vmkfstools to change the block size on the upgraded datastore.
  • D. Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore. Upgrade the virtual machine hardware on the migrated VMs, then delete the VMFS3 datastore.


Answer : B

An administrator needs to use guest OS clustering in a vSphere environment that uses a
Fibre Channel SAN. The clustering software does NOT have a SCSI target or a SCSI command pass-through requirement.
Which VMware storage type should the administrator use?

  • A. Physical RDM
  • B. VMFS
  • C. Virtual RDM
  • D. NFS


Answer : B

Which two CPU features enable the use of 64-bit virtual machines? (Choose two.)

  • A. Intel VT
  • B. NX/XD Bit
  • C. Hyper-threading
  • D. AMD RVI


Answer : A,D

An administrator is creating a new VMFS volume and needs to make it available to all hosts within a datacenter using the Web Client.
What should the administrator scan for in order to meet this requirement?

  • A. New Storage Devices and LUNs
  • B. New Storage Devices and VMFS Volumes
  • C. New VMFS Volumes and Datastores
  • D. New VMFS Volumes and LUNs


Answer : B

An administrator is deploying a virtual machine from a template.
Assuming all of the inventory objects below exist in the implementation, what is the highest level in the vCenter Server hierarchy to which a virtual machine can be deployed?

  • A. Datacenter
  • B. Cluster
  • C. Resource Pool
  • D. Host


Answer : B

Which statement is accurate when choosing the storage controller for a virtual machine using the Create New Virtual Machine wizard in custom mode?

  • A. There is a predetermined controller based on the guest OS, which cannot be changed.
  • B. A controller is recommended based on the guest OS type. The administrator can choose this controller or select any other.
  • C. There is a predetermined controller based on the guest OS, which can only be changed after the virtual machine is deployed.
  • D. The controller options presented will be based on the guest OS type. The administrator must choose one of these options.


Answer : B

Page:    1 / 18   
Total 270 questions