VMware Certified Instructor on vSphere 5 v7.2 (VCI550)

Page:    1 / 18   
Total 270 questions

An administrator is building a new vSphere Standard Switch with two active uplinks. The physical switch ports for these uplinks are placed in an etherchannel.
Which load balancing policy should the administrator use to support the etherchannel configuration?

  • A. Route based on IP hash
  • B. Route based on the originating virtual port
  • C. Route based on source MAC hash
  • D. Route based on physical NIC load

Answer : A

Which two traffic types can be enabled on the VMkernel adapters of an ESXi 5.5 host using the vSphere Web Client? (Choose two.)

  • A. Fault Tolerance Traffic
  • B. Virtual SAN Traffic
  • C. iSCSI Traffic
  • D. Virtual Machine Traffic

Answer : A,B

An organization is designing a new vSphere cluster to support a new product implementation.
The following challenges have been identified by the vSphere administration team:
The organization has the vSphere Enterprise License.
The network team needs to gather virtual machine network statistics over a long period of time.
The network team needs the ability to quickly assess virtual machine traffic in the event of an attack.
The network team has previously had problems implementing manual etherchannel configurations on their physical switches, resulting in production outages.
The new cluster's initial size is 15 hosts.
The organization is willing to upgrade to vSphere Enterprise Plus licensing if it addresses these challenges.
Which three features of a version 5.5 vSphere Distributed Switch would address these challenges? (Choose three.)

  • A. LACP in Dynamic Mode
  • B. Port Mirroring
  • C. Network vMotion
  • D. Private VLANs
  • E. Network I/O Control

Answer : A,B,C

-- Exhibit --
-- Exhibit --
Users accessing the WinXP virtual machine shown in the exhibit report intermittent connectivity to the corporate network.
The configuration is as follows:
This virtual machine runs in a DRS/HA cluster of two ESXi hosts.
The VCP_DCV_Example vSphere Distributed Switch was recently created.
The WinXP virtual machine was recently migrated from another vSphere Distributed
The WinXP virtual machine was able to connect prior to migration to this switch.
No changes to the VCP_DCV_Example switch have been made since creation.
Which step should the administrator take to resolve the WinXP virtual machine's intermittent connectivity to the corporate network?

  • A. Add the ESXi host to the switch where the virtual machine is currently running
  • B. Disable Port Blocking on the VCP_DCV_Example switch
  • C. Disable Port Blocking on the Production port group
  • D. Enable Network I/O Control on the switch to better balance I/O

Answer : A

An administrator needs to deploy a vSphere solution containing a number of hosts and a vSphere Distributed Switch.
Which steps should the administrator take to accomplish this?

  • A. Create the vSphere Distributed Switch, deploy the ESXi hosts, and then add each host to the switch.
  • B. Deploy the ESXi hosts, create an HA/DRS cluster containing the hosts, create the vSphere Distributed Switch, and then add the cluster to the switch.
  • C. Create the vSphere Distributed Switch and as each ESXi host is deployed it will be automatically added to the switch.
  • D. Deploy the ESXi hosts and then create the vSphere Distributed Switch on the hosts.

Answer : A

An administrator is migrating 135 virtual machines from a vSphere Standard Switch to a vSphere Distributed switch. The migration reports an error and only some of the virtual machines are transferred.
What is causing the error to occur?
A. The vSphere Distributed Switch was created with a single, default port group.
B. The switch has become disconnected from an ESXi host.
C. The port group on the vSphere Distributed Switch was not configured with an Elastic port binding.
D. The virtual machine that failed to transfer did not have a network adapter.

Answer : A Topic 3, Plan and Configure vSphere Storage

An administrator needs to deploy several virtual machines. Storage contention between the virtual machines should be managed by the VMkernel. Some of the virtual machines will use MSCS and should be highly available across the ESXi 5.5 hosts.
Which two storage options meet these requirements? (Choose two.)

  • A. iSCSI
  • B. NFS
  • C. Fibre Channel
  • D. vSAN

Answer : A,C

Which two precautions should a vSphere administrator take before increasing the size of a
VMFS datastore? (Choose two.)

  • A. Unmount the datastore
  • B. Perform a rescan to ensure that all hosts see the most current storage
  • C. Quiesce I/O on all disks involved
  • D. Shut down all virtual machines stored in the datastore

Answer : B,C

-- Exhibit --
-- Exhibit --
What action should the vSphere administrator take to allow for a new vApp to be created in the cluster?

  • A. Enable Distributed Resource Scheduling on the cluster
  • B. Create a Resource Pool in the cluster, and create the vApp in the Resource Pool
  • C. Enable High Availability on the cluster
  • D. Create a new Datacenter, and create the vApp in the new Datacenter

Answer : A

An administrator is installing ESXi on several hosts attached to iSCSI storage.
Why would the administrator detach the host from the IP storage network prior to installation?

  • A. It decreases the time the installer needs to search for available disk drives.
  • B. It allows the installation of a generic VAAI component for IP storage.
  • C. It prevents ESXi from installing vSphere Flash Cache to the IP storage.
  • D. It is required when installing ESXi onto a physical server that utilizes IP storage.

Answer : A

Which two statements are true regarding a new vSphere deployment that is using software
FCoE boot from SAN? (Choose two.)

  • A. Multi-pathing options must be configured by the vmkernel after boot.
  • B. The adapter must support iBFT or UEFI.
  • C. The adapter must support FBFT or FBPT.
  • D. Multi-pathing options must be configured in the Boot ROM.

Answer : A,C

What should an administrator do to configure multi-pathing using software iSCSI?

  • A. Bind the VMkernel ports to the software iSCSI initiator
  • B. Configure Zoning between the hosts and SAN switches
  • C. Configure NIC teaming on the associated uplinks
  • D. Ensure jumbo frames are enabled end-to-end

Answer : A

The current block size of a datastore in VMFS3 is 4MB. An administrator needs to upgrade the datastore to VMFS5 and wants to change it to 1MB block size.
Which action should the administrator take?

  • A. Upgrade the datastore to VMFS 5. Select the 1MB block size option during the upgrade.
  • B. Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore, then delete the VMFS3 datastore.
  • C. Upgrade the datastore to VMFS5. Use vmkfstools to change the block size on the upgraded datastore.
  • D. Create a new VMFS5 datastore with a 1MB block size. Migrate all virtual machines from the existing datastore to the new datastore. Upgrade the virtual machine hardware on the migrated VMs, then delete the VMFS3 datastore.

Answer : B

An administrator is creating a new VMFS volume and needs to make it available to all hosts within a datacenter using the Web Client.
What should the administrator scan for in order to meet this requirement?

  • A. New Storage Devices and LUNs
  • B. New Storage Devices and VMFS Volumes
  • C. New VMFS Volumes and Datastores
  • D. New VMFS Volumes and LUNs

Answer : B

An administrator attempts to delete a Storage Policy and receives an error.
Which two object types, if assigned a Storage Policy, would prevent the Storage Policy from being deleted? (Choose two.)

  • A. A virtual machine.
  • B. A virtual disk.
  • C. A datastore.
  • D. A datastore cluster.

Answer : A,B

Page:    1 / 18   
Total 270 questions