Page: 1
/ 5
Total 68 questions
You are using 802.1X authentication in your network to secure all ports. You have a printer that does not support 802.1X and you must ensure that traffic is allowed to and from this printer without authentication.
In this scenario, what will satisfy the requirement?
- A. MAC filtering
- B. MACsec
- C. static MAC bypass
- D. MAC RADIUS
Answer : C
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The DS-2 switch will be root bridge for MSTI 2.
- B. The DS-1 switch will be root bridge for MSTI 1.
- C. The DS-1 switch will be root bridge for MSTI 2.
- D. The DS-2 switch will be root bridge for MSTI 1.
Answer : AD
In OSPF, how does a router ensure that LSAs advertised to a neighboring router are received?
- A. LSA flooding guarantees that all routers will receive them successfully.
- B. LSAs are sent over a TCP connection.
- C. LSAs are acknowledged by the neighboring router.
- D. LSAs are advertised with an acknowledgement bit.
Answer : C
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. BPDUs from the root bridge for VLAN 10 have been received on the ge-0/0/7.0 interface.
- B. DS-1 is the root bridge for VLAN 10.
- C. BPDUs from the root bridge for VLAN 20 have been received on the ge-0/0/7.0 interface.
- D. Default VSTP bridge priority values are configured.
Answer : AC
Click the Exhibit button.
A user is attempting to watch a high-definition video being streamed from the media server over the network. However, the user complains that the experienced video quality is poor. While logged on to router B, a Juniper Networks device, you notice that video packets are being dropped.
In this scenario, what would solve this problem?
- A. Adjust the scheduler for the expedited-forwarding forwarding class to support a higher transmit rate.
- B. Adjust the expedited-forwarding BA classifier to router B's ge-0/0/0 interface to support a higher transmit rate.
- C. Adjust the scheduler-map to support a higher transmit rate.
- D. Adjust the expedited-forwarding BA classifier on router B's ge-0/0/1 interface to support a higher transmit rate.
Answer : D
There are two BGP routes to 10.200.200.0/24 received from two external peers. Route 1 comes from a neighbor with a router ID of 10.10.100.1 and a peer IP address of 10.10.30.1, and route 2 comes from a neighbor with a router ID of 10.10.200.1 and a peer IP address of 10.10.50.1. Both routes have the same MED value, origin value, AS path length, and local preference number.
In this scenario, which statement is correct about the active route?
- A. Route 1 will be active because of the peer IP address.
- B. Route 2 will be active because of the peer IP address.
- C. Route 1 will be active because of the router ID.
- D. Route 2 will be active because of the router ID.
Answer : D
You are asked to configure 802.1X on your access ports to allow only a single device to authenticate.
In this scenario, which configuration would you use?
- A. single supplicant mode
- B. multiple supplicant mode
- C. single-secure supplicant mode
- D. MAC authentication mode
Answer : A
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The maximum wattage that this switch can allocate to attached Ethernet devices is 100 watts.
- B. If the total power consumption exceeds 90 watts, the ge-0/0/11 interface will continue to receive power.
- C. PoE is not enabled on the ge-0/0/0 interface.
- D. The ge-0/0/10 interface supports PoE+.
Answer : AC
Click the Exhibit button.
You are asked to establish full connectivity between all devices in the BGP network.
Referring to the exhibit, which two configuration changes will allow BGP route advertisements? (Choose two.)
- A. On R2, include the loops 2 statement at the [edit protocols bgp family inet unicast] hierarchy.
- B. On R1 and R3, include the loops 2 statement at the [edit protocols bgp family inet unicast] hierarchy.
- C. On R1 and R3, include the advertise-peer-as statement at the [edit protocols bgp group external] hierarchy.
- D. On R2, include the advertise-peer-as statement at the [edit protocols bgp group external] hierarchy.
Answer : BD
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The BGP neighbor can advertise L3 VPN related routes.
- B. The BGP neighbor cannot advertise EVPN related routes.
- C. The BGP neighbor can advertise EVPN related routes.
- D. The BGP neighbor cannot advertise L3 VPN related routes.
Answer : AC
You are deploying an 802.1X solution and must determine what would happen if clients are unable to re-authenticate to the RADIUS server.
In this scenario, which configuration would provide access to the network if the supplicant is already authenticated?
- A. move
- B. permit
- C. deny
- D. sustain
Answer : D
You are deploying IP phones in your enterprise network that must receive their power through their Ethernet connection. You are using your EX Series switch's PoE ports that support IEEE 802.3af.
In this scenario, what is the maximum amount of power allocated to each interface?
- A. 10.2 W
- B. 15.4 W
- C. 30 W
- D. 50 W
Answer : B
You are deploying IP phones in your enterprise networks. When plugged in, the IP phones must be automatically provided with the correct VLAN ID needed for sending voice traffic to the EX Series switches.
In this scenario, which two solutions are required to accomplish this task? (Choose two.)
- A. Enable LLDP-MED on appropriate access interfaces.
- B. Create two VLANs and assign them as VLAN members to the appropriate access interfaces.
- C. Enable the voice VLAN feature with the appropriate access interfaces and VLAN ID for voice traffic.
- D. Use LLDP on appropriate interfaces.
Answer : AC
Click the Exhibit button.
Referring to the exhibit, how will router E quickly learn that the remote MAC addresses are no longer reachable through the router attached to the failed link?
- A. Router E receives Type 2 withdrawal messages from router D.
- B. Router E receives Type 1 withdrawal messages from router D.
- C. Router E receives Type 1 withdrawal messages from router C.
- D. Router E receives Type 2 withdrawal messages from router C.
Answer : B
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. The route is learned from a multihop BGP session.
- B. The route is learned from only one neighbor.
- C. The route is learned from a multipath BGP session.
- D. The route is learned from three different neighbors.
Answer : B
30 days access 