Hitachi HH0-200 - Certified Modular Integration Specialist exam Exam
Page: 2 / 22
Total 109 questions
Question #6 (Topic: Topic 1)
You are connected to a Hitachi Thunder 9500V?Series subsystem using Hitachi?Resource
Manager GUI. You have created LUNs for 12D+1P RAID group, and now you want to set
up one spare disk. Given the following steps:
A)select Settings-> Logical Settings
B) select Settings-> Configuration Settings
C) select the Logical Settings tab
D)select Settings-> Logical Unit-> Set Spare Drive
E)select the disk that you want to set up as spare
F)select the Spare Drive tab
Manager GUI. You have created LUNs for 12D+1P RAID group, and now you want to set
up one spare disk. Given the following steps:
A)select Settings-> Logical Settings
B) select Settings-> Configuration Settings
C) select the Logical Settings tab
D)select Settings-> Logical Unit-> Set Spare Drive
E)select the disk that you want to set up as spare
F)select the Spare Drive tab
A. B, F, E
B. B, F, G
C. D, C, E
D. F, C, G
Answer: B
Question #7 (Topic: Topic 1)
Ten LUNs must be recognized by the QLogic HBA on Microsoft Windows 2000 Server
which is connected to a Hitachi Thunder 9500V?Series subsystem. What is the system
parameter that needs to be set up?
which is connected to a Hitachi Thunder 9500V?Series subsystem. What is the system
parameter that needs to be set up?
A. in the modify Host Group option, select CCHS mode in Standard mode
B. in the modify Host Group option, select CCHS mode in Host connection mode
C. in the modify Host Group option, select HISUP2 mode in Host connection mode
D. in the modify Host Group option, select HISUP mode in Host connection mode 2
Answer: D
Question #8 (Topic: Topic 1)
You are using the Hitachi?Resource Manager GUI for the first time. You want to change to
a ferent mode from default mode. What is the first thing you should do, before changing to
a different mode?
a ferent mode from default mode. What is the first thing you should do, before changing to
a different mode?
A. go to Add-> Password and add the password
B. go to Add-> Change Mode and select the mode
C. go to Settings-> Password and register the password
D. go to Settings-> Change Properties and set the mode option to other modes
Answer: C
Question #9 (Topic: Topic 1)
A customer has Sun Netra Servers mounted on a Hitachi Data Systems?19 inch rack. You
need to mount a RK and a RKA on the same rack. What is the amps/PS rating you need to
use for both the RK and RKA together in order to ensure that the PDU is not overloaded
when two power supplies are used on both the RK and the RKA and the source is 100V?
need to mount a RK and a RKA on the same rack. What is the amps/PS rating you need to
use for both the RK and RKA together in order to ensure that the PDU is not overloaded
when two power supplies are used on both the RK and the RKA and the source is 100V?
A. 3.20
B. 5.10
C. 6.30
D. 10.20
Answer: C
Question #10 (Topic: Topic 1)
What is the vibration tolerance of a Hitachi Thunder 9570?subsystem in operation, if
installed near large generators located on the floor above or below the subsystem?
installed near large generators located on the floor above or below the subsystem?
A. 2.5 m/s2 or less
B. 3.0 m/s2 or less
C. 3.5 m/s2 or less
D. 4.0 m/s2 or less
Answer: A
