ScaleIO 1.x Server-Based SAN Exam v7.0 (E22-214)

Page:    1 / 6   
Total 79 questions

What is a benefit of ScaleIO integration with OpenStack?

  • A. Enables basic ScaleIO management using OpenStack user interfaces
  • B. Enables basic OpenStack cloud management using ScaleIO user interfaces
  • C. Ensures high availability by requiring the MDMs to run within OpenStack-initiated VMs
  • D. Provides the option for cloud servers to use either SDC or iSCSI to access ScaleIO volumes


Answer : A

Which action can be performed using only the Web Client plug-in?

  • A. Provision a volume to an SDC
  • B. Enable SNMP traps
  • C. Switch MDM ownership
  • D. Disable the Tie Breaker


Answer : A

You are upgrading to ScaleIO 1.31 in a VMware environment using the Web Client plug-in.
Which upgrade step is either optional or does not apply?

  • A. Migrate every SDC from the SVM into the ESX kernel
  • B. Upload the 1.31 SVM template
  • C. Register the 1.31 Web Client plug-in with the vCenter
  • D. Specify IP address details for the gateway VM


Answer : A

What is the purpose of the scli --switch_mdm_ownership command?

  • A. Reverse the roles of the primary and secondary MDMs
  • B. Migrate both primary and secondary MDMs to other nodes
  • C. Migrate only the primary MDM to another node
  • D. Reconfigure the primary and secondary MDMs to manage another ScaleIO cluster


Answer : A

When creating a volume on a ScaleIO 1.31 ESXi cluster, what are the defaults?

  • A. Thin, obfuscation enabled, size in multiples of 4 GB
  • B. Thick, obfuscation enabled, size in multiples of 4 GB
  • C. Thin, obfuscation disabled, size in multiples of 8 GB
  • D. Thick, obfuscation disabled, size in multiples of 8 GB


Answer : D

A ScaleIO cluster has been configured with 10 nodes running only SDS, 20 nodes running only SDC, and one storage pool with all devices. Each SDS contributes four HDD devices to the storage pool. Each server has one 10 Gb network interface. The I/O workload is random access with a 4 Kbyte block size.
What is a limiting factor for IOPs?

  • A. Number of HDD devices
  • B. Number of SDS nodes
  • C. Number of SDC nodes
  • D. Available network bandwidth


Answer : A

What is required when deploying the MDM and Tie Breaker components?

  • A. Three separate servers to host the primary and secondary MDMs, and the Tie Breaker
  • B. Three servers with a shared OpenStack Swift object store
  • C. Supported Linux or Microsoft Windows cluster with a shared file system
  • D. Servers with existing shared block storage


Answer : A

What is an accurate statement about the ScaleIO Call Home feature?

  • A. Requires that a valid e-mail address is specified
  • B. E-mails are sent to EMC Customer Support by default
  • C. Only configured during installation
  • D. Maximum severity level must be specified during installation


Answer : A

Which action can be performed using the ScaleIO GUI?

  • A. Add a Fault Set
  • B. Unmap a volume from an SDC
  • C. Disable restricted remote access
  • D. Upgrade ScaleIO to a newer version


Answer : A

An application is using two ScaleIO volumes that have been provisioned to a host. You want to use the ScaleIO consistency group feature to snapshot both volumes.
What is a restriction?

  • A. Both volumes must come from the same ScaleIO cluster
  • B. Both volumes must come from the same protection domain
  • C. SDC must be disconnected from the host first
  • D. Host operating system must be Linux


Answer : A

How many simultaneous instances of the ScaleIO GUI can be running for a single cluster?

  • A. One per ScaleIO cluster
  • B. Dependent on the client OS
  • C. One instance per role, per ScaleIO cluster
  • D. Dependent on the role of the specific user


Answer : A

You are performing sizing calculations for a ScaleIO cluster with all servers having the same hardware configuration. This effort is being performed for a prototyping lab and high availability is not a concern. You have estimated that aggregate I/O traffic to all ScaleIO devices is 140 MB/sec.
What is the minimum network configuration that can support this workload?

  • A. One 1 Gb NIC per server
  • B. One 10 Gb NIC per server
  • C. Two 10 Gb NICs per server
  • D. Four 10 Gb NICs per server


Answer : B

You have been asked to install a 200-node ScaleIO 1.31 cluster with a mixture of Linux and
Microsoft Windows servers. Which tool should be used?

  • A. ScaleIO Installation Manager
  • B. Local Linux YUM server with a customized repository
  • C. Python script install.py
  • D. ScaleIO GUI


Answer : A

Which ScaleIO utility provides real-time graphical reporting of rebuild and rebalance traffic?

  • A. ScaleIO GUI
  • B. Installation Manager/Gateway
  • C. vSphere Web Client plug-in
  • D. SCLI


Answer : A

When testing the integration of a ScaleIO cluster with an OpenStack cloud, the administrator discovers that creating a ScaleIO volume from the Horizon UI fails. You have verified that all required drivers and configuration files are in place in every node.
What is a possible cause for the failure?

  • A. OpenStack Cinder service has not been restarted
  • B. REST gateway has not been configured with credentials for the OpenStack client
  • C. Cinder node does not have IP access to the primary MDM
  • D. Primary and secondary MDMs have not been restarted


Answer : A

Page:    1 / 6   
Total 79 questions