Dell E20-885 - VNX Solutions Expert Exam for Implementation Engineers Exam

Question #11 (Topic: )
You are implementing a VNX using AVM, and you cannot create any more dvols from their
remaining classic LUNS to create a stripe volume.
What could be a reason for this?
A. LUNs must come from different RAID Groups. B. LUNs must have different RAID configurations. C. LUNs must not exceed 18 TB in size. D. LUNs must come from the same RAID Group.
Answer: A
Question #12 (Topic: )
A customer is implementing an Etherchannel environment. They are concerned about the
how the VNX will handle the traffic load distribution.
What is used by VNX to distribute the traffic?
A. EUI B. Round Robin C. MAC D. Serial Number Seed
Answer: C
Question #13 (Topic: )
Refer to the exhibit.
[EMC-E20-885-7.0/EMC-E20-885-7_2.png]
LUN 30 is a 50 GB LUN on a 4+1 R5 group consisting of 300 GB drives. It is the only
active LUN.
What can you infer about the I/O access pattern to LUN 30?
A. I/O is very random. B. I/O is largely sequential. C. Locality of reference is high. D. Locality of reference is low.
Answer: A
Question #14 (Topic: )
You implement FAST VP on an existing EMC VNX. The Extreme Performance pool holds
5% of usable storage, the Performance pool holds 20%, and the Capacity pool holds 75%.
The Tiering Policy is set to Auto.
The attached hosts run several applications. Some applications access data frequently,
while others are write-once read-never. Twenty minutes after tiering is started, the
customer reports there is no performance improvement. How should you respond?
A. Data relocation involves a warm-up period the performance benefit is seen over the long term. B. The Performance pool is too large for effective data relocation. C. The warm-up period for FAST VP is determined by the size of the Capacity pool. D. Three-level tiering is not supported in FAST VP.
Answer: A
Question #15 (Topic: )
A customer plans to migrate their virtualized server environment to a new VNX array. They
are concerned their storage pool configuration could be compromised by their varied server
workload profiles. What vSphere v5.0 feature would you discuss with the customer to
address their concern?
A. Clustered Datastore Affinity B. Raw Device Mapping C. Native Multipathing D. PowerPath/VE
Answer: A
Download Exam
Page: 3 / 55
Total 275 questions