Dell E20-850 - CLARiiON Implementation Engineer Expert Exam Exam
Page: 2 / 15
Total 75 questions
Question #6 (Topic: Topic 0)
Consider the following configuration:
LUN 10 has a default owner of SPB.
LUN 10 is in Raid Group 3.
LUN 10 is in Host-A's storage group.
SPB displays Faulted in Navisphere.
There is a faulted drive in Raid Group 3.
Why is LUN 10 displayed under nowned LUNs?in Navisphere?
LUN 10 has a default owner of SPB.
LUN 10 is in Raid Group 3.
LUN 10 is in Host-A's storage group.
SPB displays Faulted in Navisphere.
There is a faulted drive in Raid Group 3.
Why is LUN 10 displayed under nowned LUNs?in Navisphere?
A. Host-A has no failover software
B. A Hot Spare is active for Raid Group 3
C. A Hot Spare is not active for Raid Group 3
D. LUN 10 is configured for Auto Assignment
Answer: A
Question #7 (Topic: Topic 0)
A customer wants to implement an exchange environment but is restricted by cost. The
customer has calculated its read write ratio to be 3:1. Which RAID solution would you
recommend for the Exchange Database LUNs?
customer has calculated its read write ratio to be 3:1. Which RAID solution would you
recommend for the Exchange Database LUNs?
A. RAID-1/0
B. RAID-1
C. RAID-3
D. RAID-5
Answer: D
Question #8 (Topic: Topic 0)
What is required to use the CLARiiON ktrace utility?
A. EMCRemote
B. Navisphere CLI
C. Navisphere Analyzer
D. Navisphere Manager
Answer: A
Question #9 (Topic: Topic 0)
An HP-UX host has been SAN attached to a CX600 for nine months at FM Corp. Due to
new FM Corp policy, the Navisphere Agent was removed from the HP-UX server. What
effect will this have on the HP-UX connectivity?
new FM Corp policy, the Navisphere Agent was removed from the HP-UX server. What
effect will this have on the HP-UX connectivity?
A. The HP-UX host will remain connected
B. The HP-UX host will need to be manually registered to connect
C. The HP-UX host will remain connected until the next host reboot
D. The HP-UX host will remain connected until the next CX600 reboot
Answer: A
Question #10 (Topic: Topic 0)
A Win2000 host is connected by a SAN to a CX500. Navisphere is reporting the correct
hostname but gives a private network IP address for the host. How can the IP address be
changed?
hostname but gives a private network IP address for the host. How can the IP address be
changed?
A. Edit the agent.config file
B. Edit the navimon.cfg file
C. Create an agentID.txt file
D. Create a registry key for HostID
Answer: C