Page: 1
/ 5
Total 69 questions
An administrator has multiple, geographically separated, IBM i systems to manage. The administrator must monitor system performance and run performance analysis on an as- needed basis, from web browsers inside and outside the corporate network.
Which web-based tool will support the requirements'?
- A. IBM Performance Management for Power Systems
- B. IBM i Performance Data Investigator
- C. System i Navigator for Windows Management Central
- D. IBM i Performance Tools Management Feature
Answer : A
A subsystem description is configured as shown in the following screens;
Users are assigned to each job queue to run their batch work. The users assigned to the
ACCOUNTING job queue are complaining that their batch jobs are occasionally not running. Other users do not experience this issue.
Why are ACCOUNTING users experiencing this problem?
- A. The jobs in the ACCOUNTING queue are run at the lowest execution pnonty based on the sequence number field Jobs from CORP and ENGR are consuming all the processing capability allowed for the subsystem.
- B. The run priority of the job does not match the sequence number of the job queue entry.
- C. The subsystem starts jobs up to the maximum allowed for each job queue starting with the lowest sequence number (SEQ NBR column)
- D. The auxiliary storage pool group is not set to match the number of job queue entries in the subsystem.
Answer : B
An administrator is working on a hardware replacement for a current system
Which tool should be used to determine if the current LIC, OS, and existing adapters may be migrated to the new system?
- A. IBM PreUpgrade Verification Tool
- B. IBM Workload Estimator
- C. IBM System Planning Tool
- D. IBM Migration Modeler
Answer : D
A file PF1 exists in library XYZLIB,and FILE2 exists in IFS directory ABCDIR.
What are the minimum set of authorities to grant a user read-only access to XYZLIB/PF1 and /ABCDIR/FILE2?
- A. 1)*USEforXYZUBandPF1 2) *X for ABCDIR and *R for FILE2
- B. 1)*XforXYZUB,*RforPF1 2) *USE for ABCDIR and FILE2
- C. 1) *CHANGE for XYZLIB and PF1 2) *RX for ABCDIR and *R for FILE2
- D. 1) *USE for XYZLIB: *CHANGE for PF1 2) *RX for ABCDIR and *RX for FILE2
Answer : B
An administrator has bean directed to configure DDM using TCP/IP between two systems:
"SYSTEM1" and "SYSTEM2". Both systems are in the site DNS. Applications on both systems require DDM access to files on the other system.
The administratorhas made sure that the RemoteDatabaseDirectory has the *LOCALentry configured correctly on both systems.
What is additionally required so the communications will function correctly between the systems?
- A. Add a Remote Database Directory entry for the other system
- B. Add a host table entry for QDDMSERVER using address "LOOPBACK on each system
- C. Add a host table entry for the local system in its hosts table
- D. Change the "DDM Request Access" setting in the network attributes to QDDMSERVER
Answer : A
A system is configured with U.S. English as the primary language and Spanish as a secondary language. Where is the language specified when setting up a new user profile for a Spanish speaking user?
- A. The Language ID parameter in the user profile
- B. The Locale parameter in the user profile
- C. This user's QLANGID environment variable
- D. The Country ID parameter in the user profile
Answer : C
An administrator added a prestart job entry to the QCMN subsystem using the following command:
ADDPJE SBSD(QCMN) PGM(PGMA) INUOBS(350) THRESHOLD(250) ADUOBS(150)
MAXUSE (200)
The entry is used extensively and many remote requests connect to the prestart jobs. After adding the entry, the administrator determines that the system periodically freezes and response time is slow.
What is the most likely cause of the problem?
- A. The ADLJOBS parameter is too high and many system resources are used at the same time to generate new prestart jobs
- B. The MAXUSE parameter is too low and a big job log is generated when the last request uses the prestart job.
- C. There are not enough system resources in QCMN to handle the additional jobs.
- D. The prestart job entry competes with the TCP/IP jobs
Answer : B
An administrator has just completed replacing IBM System i Access for Windows with IBM i
Access Client Solutions on all users systems. Users report they now have Console and
Management options that they did not have when using IBM System i Access for Windows.
What can be done to fix this?
- A. Have the users perform the following in IBM i Access Client Solutions: Select Tools from the Top menu. Select Options. On the Properties tab, deselect "OPCONSOLE, HWCONSOLE, and HMCPROBE".
- B. Create a Group Profile, make the users a member of this new group. Then enter in "WRKFCNUSGT Select Function "QIBM_ACS_CONMGMT_ACCESSn. Press F2 "Edit Authority" Press F6 "Add new Users" Add the new group profile and set the Authority to "EXCLUDE".
- C. Modify exit point QIBM_QACS_EXCLUDE to exclude options OPSCONSOLE, HWCONSOLE and HMCPROBE.
- D. Exclude OPCONSOLE, HWCONSOLE, and HMCPROBE in the AcsConfig properties file.
Answer : D
What is required to restore a Hardware Management Console (HMC) to the last working configuration?
- A. The last HMC back up performed via Back Up Management Console Data task
- B. Recovery DVDs and the last HMC back up performed via Save Upgrade Data task
- C. The last HMC back up performed via Save Upgrade Data task
- D. Recovery DVDs and the last HMC back up performed via Back Up Management Console Data task
Answer : A
command is mistakenly canceled.When the restore is
reattempted,message CPF9032 "Document interchange session not started" is returned.
Which step{s) will resume the restore?
- A. Run the RCLSTG command Run the RSTDLO RSTFLR ('NEW) command
- B. Run the command RSTDLO RSTFLR (*NEW)
- C. Run the RCLDLO command Run the RSTDLO command D Run the DSPJOBLOG command and note the position value of the last item restored Run the RSTDLO RSTFLR CALL) command with the POSITION parameter set to the value listed for the last item restored
Answer : C
An IBM i guest LPAR is hosted by another IBM i LPAR. The administrator wants to save the virtual storage spaces.
Which command is used to save the virtual storage spaces?
- A. SAVNWSSTG
- B. SAVDLO
- C. SAVUB *NONSYS
- D. SAV
Answer : D
An administrator on a POWER8 machine needs to create a second partition. It has only one physical Ethernet adapter.
How can the administrator provide Ethernet connectivity to the second partition after creating a Virtual Ethernet adapter in both the Server partition and the Client partition1?
- A. In PowerVM, assign a Link Aggregation connection to the virtual partition via the Virtual Ethernet adapter.
- B. On the Server partition, set up a Bridge between the physical adapter and the Ethernet Server adapter.
- C. On the Client partition, bridge the Virtual Ethernet segment to a Line Description.
- D. On the Client partition, create a virtual bridge using the server adapter address and specifying a Bridge ID. On the Server partition, create a virtual bridge using the client adapter address and specifying the same Bridge ID.
Answer : B
A P0WER8 system with a single FSP is running firmware SV830_048. When the administrator goes to Fix Central, the latest firmware is SV830_068_050.
What is the effect of installing this software?
- A. The upgrade is disruptive because the only PowerKVM upgrades are concurrent when using OPAL.
- B. Since both the installed and the new firmware are at SV830, the upgrade will be concurrent when done from the OS.
- C. The upgrade is concurrent because the 068 and the 050 are not the same number.
- D. The upgrade would be disruptive as the 050 in the latest firmware is higher than the 048 currently running on the FSP.
Answer : A
An administrator is trying to restore a journal receiver to a different system. The journal receiver library does not exist on the new system.
What is the result of restoring this journal receiver?
- A. The restores fails and the receiver is not restored.
- B. The job goes to a MSGW and requires a response before continuing.
- C. The receiver is restored to the library where the journal is located.
- D. The library is automatically created and the receiver restores.
Answer : A
An auditor needs an administrator to show the differences between a file as it currently exists and as it existed in the past.
Which command can help the administrator determine the differences assuming that journaling for the file was active and the receivers for the timeframe in question exist?
- A. CMPPFM
- B. CMPJRNIMG
- C. RCVJRNE
- D. WRKJRNA
Answer : C
30 days access 