Avaya 7004 - Avaya Communication Server 1000 for Avaya Aura Maintenance Exam Exam
Page: 2 / 14
Total 66 questions
Question #6 (Topic: )
With Automatic On-Net to Off-Net Overflow, if all on-net facilities such as TIE trunks
between locations are busy, NARS can convert a dialed UDP number to a Listed Directory
Number of the applicable DID number at that location and use off-net facilities, such as CO
trunks, to complete the call. When provisioning Automatic On-Net to Off-Net Overflow,
which parameter is not correct?
between locations are busy, NARS can convert a dialed UDP number to a Listed Directory
Number of the applicable DID number at that location and use off-net facilities, such as CO
trunks, to complete the call. When provisioning Automatic On-Net to Off-Net Overflow,
which parameter is not correct?
A. Only one Listed Directory Number can be defined per Location Code (LOC).
B. Multiple NPAs per Location Code are allowed.
C. Multiple NXX codes per Location Code can be defined.
D. Multiple ranges of DNs within each NXX per Location Code can he defined.
Answer: D
Question #7 (Topic: )
Click the Exhibit button.
[Avaya-7004-6.1/Avaya-7004-6_2.png]
Consider the a customers dialing plan shown in the exhibit, which detail on-net and off-net
dialing requirements:
TIE trunks between Location A and Location B are currently out of service.
TIE trunks between Location B and Location D are currently out of service.
All over TIE trunks are fully functional.
Which route will a call to LOC 304-2001 take if it originates from location B?
[Avaya-7004-6.1/Avaya-7004-6_2.png]
Consider the a customers dialing plan shown in the exhibit, which detail on-net and off-net
dialing requirements:
TIE trunks between Location A and Location B are currently out of service.
TIE trunks between Location B and Location D are currently out of service.
All over TIE trunks are fully functional.
Which route will a call to LOC 304-2001 take if it originates from location B?
A. TIE BD to Location D.
B. TIE AB to Location A.
C. TIE BD to Location D, then TIE CD to Location C then TIE AC to Location A
D. The call will not leave the originating PBX
Answer: D
Question #8 (Topic: )
To enabled and configured SIP on a Communication Server 1000 system, which software
component on the IP Telephone Node must you enabled first using Element Manger?
component on the IP Telephone Node must you enabled first using Element Manger?
A. SIPGateway
B. Media Gateway
C. Terminal Proxy Server (TPS)
D. SIP Proxy
Answer: C
Question #9 (Topic: )
Click the Exhibit button.
[Avaya-7004-6.1/Avaya-7004-7_2.png]
A customer has a Communication Server 1000RIs. 7 x system. Telephone users are
required to use Basic Alternate Route Selection (BARS) to make toll calls.
What Class of Service (CLS) adjustment must you make telephone in order to allow the
system to use the telephone network class of service (NCOS) to determine call eligibility?
[Avaya-7004-6.1/Avaya-7004-7_2.png]
A customer has a Communication Server 1000RIs. 7 x system. Telephone users are
required to use Basic Alternate Route Selection (BARS) to make toll calls.
What Class of Service (CLS) adjustment must you make telephone in order to allow the
system to use the telephone network class of service (NCOS) to determine call eligibility?
A. change the CLS entry SRE to CTD
B. change the CLS entry SRE to FR2
C. change the CLS entry SRE to CUN
D. change the CLS entry SRE to UNR
Answer: D
Question #10 (Topic: )
Click the Exhibit button.
[Avaya-7004-6.1/Avaya-7004-8_2.png]
Given the SDRR programming options shown in the exhibit, which SDRR programming
would allow a user to dial 1-900-867-3333, but not successfully dial any other 1-900 based
number?
[Avaya-7004-6.1/Avaya-7004-8_2.png]
Given the SDRR programming options shown in the exhibit, which SDRR programming
would allow a user to dial 1-900-867-3333, but not successfully dial any other 1-900 based
number?
A. Table 1
B. Table 2
C. Table 3
D. Table 4
Answer: A
