Administering Microsoft System Center Configuration Manager and Cloud Services Integration v1.0 (70-703)

Page:    1 / 11   
Total 156 questions

You have a deployment of System Center Configuration Manager (Current Branch).
Hardware inventory is enabled for all Configuration Manager clients.
You create a device collection named Collection1.
You need to include Trusted Platform Module (TPM) information in the hardware inventory of the devices in Collection1.
What should you configure in Configuration Manager?

  • A. a configuration baseline
  • B. the Client Device Settings
  • C. hardware requirements
  • D. a compliance policy


Answer : B

Explanation:
We need to add a Hardware Inventory Class in the Client Device Settings.
References:
https://docs.microsoft.com/en-us/previous-versions/system-center/system-center-2012-R2/gg712290(v=technet.10)

HOTSPOT -
You have a System Center Configuration Manager (Current Branch) hierarchy that contains a single primary server named cm01.contoso.corp.
You have a Web Application Proxy that presents the management point and the distribution point to the Internet as sccm.contoso.com.
You have a user who has a client computer that runs Windows 10. The user currently works at a customer site. The user has access to the Internet but cannot access the customer’s corporate network.
You discover that the Configuration Manager client on the computer has an issue.
You need to reinstall the Configuration Manager client on the computer.
Which command should you run? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:




Answer :

References:
https://docs.microsoft.com/en-us/sccm/core/clients/deploy/about-client-installation-properties

DRAG DROP -
Your network contains clustered file servers and application servers that have local shares.
You plan to use Hardware Inventory to capture the Win32_ClusterShare class.
You need to find all the file shares on the servers on the network. The solution must minimize the amount of information that is captured.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:




Answer :

References:
https://www.systemcenterdudes.com/configure-sccm-2012-client-settings/

You have a deployment of System Center Configuration Manager (Current Branch).
You configure discovery.
You have a query that returns all devices without the Configuration Manager client installed. You create a collection that based on the query.
You need to deploy the Configuration Manager client only to the members of the collection.
Which deployment method should you use?

  • A. a package deployment
  • B. a software update point-based installation
  • C. a manual client push installation
  • D. a Group Policy installation


Answer : C

References:
https://docs.microsoft.com/en-us/sccm/core/clients/deploy/deploy-clients-to-windows-computers

DRAG DROP -
You have a deployment of System Center Configuration Manager (Current Branch).
You discover that some users have an executable file named App1.exe configured to run at start up.
You need to identify which computers have App1.exe configured to run at start up.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:




Answer :

References:
https://docs.microsoft.com/en-us/sccm/compliance/get-started/get-started-with-compliance-settings

DRAG DROP -
You have a deployment of System Center Configuration Manager (Current Branch).
You need to identify computers that have a specific registry value set in the registry.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:




Answer :

Step 1: Create a configuration item that has a registry value and a compliance rule.
Compliance rules specify the conditions that define the compliance of a configuration item. Before a setting can be evaluated for compliance, it must have at least one compliance rule.
Next step: Create configuration baselines
Step 2: Create a configuration baseline.
Configuration baselines in System Center Configuration Manager contain predefined configuration items and optionally, other configuration baselines.
Step 3: Deploy a configuration baseline to a collection.
After a configuration baseline is created, you can deploy it to a collection so that devices in that collection download the configuration baseline and assess their compliance with it.
References:
https://docs.microsoft.com/en-us/sccm/compliance/deploy-use/create-configuration-baselines https://docs.microsoft.com/en-us/sccm/compliance/deploy-use/create-custom-configuration-items-for-windows-desktop-and-server-computers-managed-with-the- client

Your company manages all its desktop computers by using System Center Configuration Manager (Current Branch).
You need to collect software usage data from all the computers. The solution must ensure that all the software usage data is sent to Configuration Manager daily.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Deploy the script to the All Systems collection
  • B. Create a software metering rule.
  • C. Deploy a Group Policy object (GPO) that contains the script.
  • D. Create a script that contains the commercial ID for Windows Analytics.
  • E. Modify the Client Settings.


Answer : BE

References:
https://docs.microsoft.com/en-us/sccm/apps/deploy-use/monitor-app-usage-with-software-metering

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to deploy System Center Configuration Manager (Current Branch) by using an initial pilot deployment.
The pilot deployment will contain five computers that run Windows 10.
You need to deploy the Configuration Manager client to the five computers only.
Solution: From the Configuration Manager console, you create a custom package. Deploy the package to the All Unknown Computers collection.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : B

Explanation:
Instead create a Group Policy object (GPO) that contains a WMI filter for the five computers. To the GPO, you add a startup script that runs ccmsetup.exe.
References:
http://woshub.com/group-policy-filtering-using-wmi-filters/

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to deploy System Center Configuration Manager (Current Branch) by using an initial pilot deployment.
The pilot deployment will contain five computers that run Windows 10.
You need to deploy the Configuration Manager client to the five computers only.
Solution: From each client, you run ccmsetup.exe.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : A

Explanation:
As there are only five computers in the pilot group, we can perform a manual installation of the Configuration Manager client on them.
References:
https://docs.microsoft.com/en-us/sccm/core/clients/deploy/deploy-clients-to-windows-computers

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to deploy System Center Configuration Manager (Current Branch) by using an initial pilot deployment.
The pilot deployment will contain five computers that run Windows 10.
You need to deploy the Configuration Manager client to the five computers only.
Solution: From each client, you run CMEnroll.exe.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : B

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You plan to deploy System Center Configuration Manager (Current Branch) by using an initial pilot deployment.
The pilot deployment will contain five computers that run Windows 10.
You need to deploy the Configuration Manager client to the five computers only.
Solution: You create a Group Policy object (GPO) that contains a WMI filter for the five computers. To the GPO, you add a startup script that runs ccmsetup.exe.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : B

Explanation:
Ccmsetup.exe is used to deploy the Configuration Manager client but WMI filtering is based on device types. We should use security filtering instead.
References:
https://docs.microsoft.com/en-us/sccm/core/clients/deploy/deploy-clients-to-windows-computers https://blogs.technet.microsoft.com/grouppolicy/2009/07/30/security-filtering-wmi-filtering-and-item-level-targeting-in-group-policy-preferences/

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has client computers that run either the 32-bit version of Windows 8 or the 64-bit version of Windows 10.
You need to install a line-of-business application to the computers. The 64-bit version of the application must be installed on the Windows 10 computers.
Solution: Create one application that has one deployment type. Configure two requirements for the deployment type.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : B

References:
https://blogs.technet.microsoft.com/canitpro/2013/06/02/step-by-step-managing-multiple-versions-of-the-same-application-via-system-center-configuration- manager/

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has client computers that run either the 32-bit version of Windows 8 or the 64-bit version of Windows 10.
You need to install a line-of-business application to the computers. The 64-bit version of the application must be installed on the Windows 10 computers.
Solution: Create two applications that each has one deployment type. Configure a requirement for each deployment type.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : B

References:
https://blogs.technet.microsoft.com/canitpro/2013/06/02/step-by-step-managing-multiple-versions-of-the-same-application-via-system-center-configuration- manager/

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has client computers that run either the 32-bit version of Windows 8 or the 64-bit version of Windows 10.
You need to install a line-of-business application to the computers. The 64-bit version of the application must be installed on the Windows 10 computers.
Solution: Create one application that has two deployment types. Configure a requirement for each deployment type.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : A

References:
https://blogs.technet.microsoft.com/canitpro/2013/06/02/step-by-step-managing-multiple-versions-of-the-same-application-via-system-center-configuration- manager/

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company has client computers that run either the 32-bit version of Windows 8 or the 64-bit version of Windows 10.
You need to install a line-of-business application to the computers. The 64-bit version of the application must be installed on the Windows 10 computers.
Solution: Create one package that uses two programs. Configure a requirement for each program.
Does this meet the goal?

  • A. Yes
  • B. No


Answer : B

References:
https://blogs.technet.microsoft.com/canitpro/2013/06/02/step-by-step-managing-multiple-versions-of-the-same-application-via-system-center-configuration- manager/

Page:    1 / 11   
Total 156 questions