Mobile Internet Technology for Field Engineers v6.3 (650-042)

Page:    1 / 5   
Total 82 questions

When viewing port-level counters, what does the TX PAUSE field indicate?

  • A. The number of correct transmitted flow control frames.
  • B. The number of correct received flow control frames.
  • C. The number of frames that were transmitted with an error due to transmit FIFO underflow or TXERR signal assertion.
  • D. The number of received frames during which physical (PHY) symbol errors were detected.


Answer : A

When troubleshooting the SGSN interaction with BSC and RNC, what does the show sccp- network 1 status all command do?

  • A. It provides a count of in-progress calls and their duration.
  • B. It lists ranges of time in 100-ms increments and 1-second increments.
  • C. It displays if the subsystem on the DPC that you suspect is problematic shows as available.
  • D. It displays a list of all RNCs that have communicated with the SGSN.


Answer : C

Which of the following statements is true regarding threshold crossing alarms?

  • A. When the threshold value is crossed, you will see all outstanding alarms
  • B. By default, the system is configured to use the TCA alarm model.
  • C. By default, the system is configured to use the alert model.
  • D. When a TCA alarm model is issued, you will not see any outstanding alarms on the system.


Answer : A

What is the function of GTT associations?

  • A. routes particular IMSIs
  • B. displays "out addresses"
  • C. defines rules for identifying the global title address map to use for determining the HLR point code
  • D. associates an IMSI prefix with a global title


Answer : C

What type of Cisco ASR 5000 service is needed for communication between a Cisco MME and a serving gateway?

  • A. eGTP
  • B. SGW
  • C. GTPU
  • D. PGW


Answer : A

Which of the following statements is true regarding the PMM-Connected state?

  • A. Paging is needed in order to reach the mobile station, such as for signaling.
  • B. The mobile station performs the routing area update procedure when RAI in the mobility management system information changes.
  • C. There is no communication between the mobile station and the 3G SGSN.
  • D. The mobile station performs a routing area update if the routing area changes.


Answer : D

Which of the following statements is true regarding the Cisco ASR 5000 bootup process?

  • A. The final tasks that are created on a PSC are not related to the contents of the configuration file.
  • B. The boot procedure can be started in three ways.
  • C. The network interface configuration is used to identify how the system should start
  • D. The default state of both RCCs is active.


Answer : D

What would initiate the Cisco ASR 5000 bootup process?

  • A. Slots 8 and 9 receive power.
  • B. SMC begins the boot process.
  • C. Power is cycled to the Cisco ASR 5000
  • D. SMCs and SPIOs perform POST.


Answer : C

Which context provides CU user access via SPIO interfaces?

  • A. Accounting context
  • B. AAA context
  • C. Source context
  • D. Management context


Answer : D

Which of the following is a step of Gb over SDH configuration?

  • A. Configure the network-service-entity per NSE.
  • B. Configure the E1s and the time slots on the SRM-1 card.
  • C. Define the NSE and the corresponding LAC and RAC in the GPRS service
  • D. Configure the DLCI and bind it to the E1s.


Answer : D

How do you configure the system to store CDRs on the local GTPP Storage Server?

  • A. Execute the gtpp storage-server local file command.
  • B. Execute the storage-server mode command.
  • C. Execute the gtpp storage-server mode command.
  • D. Execute the storage-server mode local command.


Answer : C

Which two statements are true regarding routing area update and SGSN Serving RNS relocation procedures? (Choose two)

  • A. Routing area update takes precedence over the SGSN Serving RNS relocation procedure
  • B. Routing area update is not conditional after the SGSN Serving RNS relocation
  • C. Both routing area update and SGSN Serving RNS relocation happen only when the user equipment is in the PMM-Connected state and when the POP context is active.
  • D. 5G5N does not support periodic, intra-, and inter-SGSN routing area updates.
  • E. Routing area update is conditional after the SGSN Serving RNS relocation procedure:
  • F. Both routing area update and SGSN Serving RNS relocation are UMTS procedures


Answer : C,E

Which of the following statements is true regarding loopback interfaces?

  • A. They associate a service to an IP address that is assigned to a logical interface.
  • B. They create a relationship between certain elements of the system.
  • C. They associate a specific logical interface (configured within a particular context) to a physical port.
  • D. They are not associated with any physical port.


Answer : D

Which two of the following are information items that the show task resource command displays? (Choose two.)

  • A. maximum number of active sessions
  • B. each task that is running
  • C. allocated and used CPU time
  • D. license limit
  • E. number of standby session manager
  • F. number of session managers on the system


Answer : B,C

How many session managers (and accompanying aaamgrs) can be created per PSC?

  • A. up to 5
  • B. up to 20
  • C. up to 8
  • D. up to 10


Answer : D

Page:    1 / 5   
Total 82 questions