HP HPE6-A49 - Aruba Certified Design Expert 8 Written Exam Exam
Page: 2 / 12
Total 60 questions
Question #6 (Topic: Topic 1)
[HP-HPE6-A49-1.0/xmlfile-11_1.jpg]
[HP-HPE6-A49-1.0/xmlfile-12_1.png]
[HP-HPE6-A49-1.0/xmlfile-12_2.jpg]
A hospital needs an upgrade to 802.11ac for its wireless network. The wireless network supports:
? wireless medical devices
? medical staff voice communicators
? laptops in nurse stations
? medical staff tablets
? visitor and patient personal devices
All of these devices support both the 2.4GHz and 5GHz band. Assuming about a max throughput of 150 Mbps per AP, the hospital would like to support about 4
Mbps per client.
The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital expects will need to support about 800 wireless devices. The
exhibits show heatmaps from this plan. The architect also plans to deploy APs in stairwells between floors.
How well does the plan meet the requirements?
[HP-HPE6-A49-1.0/xmlfile-12_1.png]
[HP-HPE6-A49-1.0/xmlfile-12_2.jpg]
A hospital needs an upgrade to 802.11ac for its wireless network. The wireless network supports:
? wireless medical devices
? medical staff voice communicators
? laptops in nurse stations
? medical staff tablets
? visitor and patient personal devices
All of these devices support both the 2.4GHz and 5GHz band. Assuming about a max throughput of 150 Mbps per AP, the hospital would like to support about 4
Mbps per client.
The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital expects will need to support about 800 wireless devices. The
exhibits show heatmaps from this plan. The architect also plans to deploy APs in stairwells between floors.
How well does the plan meet the requirements?
A. The current AP placement fails to account for the lead-lined walls that are common in patient and exam rooms.
B. The current AP placement fails to provide adequate signal for the voice communicators in several areas.
C. The current AP placement meets coverage requirements, but does not meet capacity requirements.
D. The current AP placement meets the customer requirements in terms of coverage and capacity.
Answer: D
Question #7 (Topic: Topic 1)
An indoor sports stadium has 5,000 seats in two rings:
? The stadium has a ceiling height of 60 feet (18m).
? There is a catwalk around the perimeter of the court, between the court and the seating areas. This catwalk is 40 feet (12m) from the floor.
? There are two scoreboards at either end of the stadium.
? The construction of the stadium is concrete and steel.
The customer does not want an under-seat, pico cell deployment, and the customer requires 802.11ac Wave 2.
Which AP model is appropriate to provide coverage in the main stadium bowl?
? The stadium has a ceiling height of 60 feet (18m).
? There is a catwalk around the perimeter of the court, between the court and the seating areas. This catwalk is 40 feet (12m) from the floor.
? There are two scoreboards at either end of the stadium.
? The construction of the stadium is concrete and steel.
The customer does not want an under-seat, pico cell deployment, and the customer requires 802.11ac Wave 2.
Which AP model is appropriate to provide coverage in the main stadium bowl?
A. AP-228
B. AP-344
C. AP-365
D. AP-375
Answer: A
Question #8 (Topic: Topic 1)
Refer to the exhibit.
[HP-HPE6-A49-1.0/xmlfile-14_1.jpg]
A customer has a wired infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services. They will now add a new wireless
solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must
provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?
[HP-HPE6-A49-1.0/xmlfile-14_1.jpg]
A customer has a wired infrastructure shown in the exhibit. The customer is in the process of expanding their wireless services. They will now add a new wireless
solution, with mobility controllers (MCs) connected as shown. The new wireless solution will support a total of 450 APs and about 26,000 wireless devices. It must
provide seamless roaming across the entire campus.
After the new deployment, both wired and wireless devices experience IP connectivity issues.
Which change to the existing infrastructure should the architect recommend to support all of the customer requirements?
A. The MCs should be moved to the aggregation layer, and more MCs added.
B. The core and aggregation switches should disable Virtual Switching Framework (VSF).
C. The core switches should be replaced with switches that have larger ARP tables.
D. The wired VLANs should be combined into a single VLAN and /16 subnet.
Answer: B
Question #9 (Topic: Topic 1)
Refer to the exhibit.
[HP-HPE6-A49-1.0/xmlfile-16_1.jpg]
A casino and a retail space has an existing Aruba network with Aruba AP-335s. The customer wants to deploy Meridian and enable proximity-based campaigns.
The exhibit shows a segment of the floor plan. When visitors enter the areas circled in the exhibit, they should receive a targeted notification about promotions and
sales.
What should the architect explain to the customer about how to finish the solution?
[HP-HPE6-A49-1.0/xmlfile-16_1.jpg]
A casino and a retail space has an existing Aruba network with Aruba AP-335s. The customer wants to deploy Meridian and enable proximity-based campaigns.
The exhibit shows a segment of the floor plan. When visitors enter the areas circled in the exhibit, they should receive a targeted notification about promotions and
sales.
What should the architect explain to the customer about how to finish the solution?
A. This solution will require about 6 battery-powered beacons, which can be managed by the APs.
B. While these APs cannot act as beacons, they have a USB slot that accepts USB beacons.
C. The customer can enable the built-in BLE capability in the AP-335 radio to meet these requirements.
D. The customer must remember to purchase a Meridian Maps license with the Campaigns license.
Answer: A
Question #10 (Topic: Topic 1)
Refer to the exhibit.
[HP-HPE6-A49-1.0/xmlfile-17_1.png]
A hotel needs a wireless solution. The architect has selected 303H Series, controlled by a local MC, as the best choice. The hotel plans to have the APs installed
in the existing wall boxes which have one Ethernet port each.
The architect has created to BOM shown in the exhibit. (Note that this portion of the BOM does not include the MC, which is not part of this question.)
Which additional clarification should the architect seek to determine whether this BOM fully meets the customer needs?
[HP-HPE6-A49-1.0/xmlfile-17_1.png]
A hotel needs a wireless solution. The architect has selected 303H Series, controlled by a local MC, as the best choice. The hotel plans to have the APs installed
in the existing wall boxes which have one Ethernet port each.
The architect has created to BOM shown in the exhibit. (Note that this portion of the BOM does not include the MC, which is not part of this question.)
Which additional clarification should the architect seek to determine whether this BOM fully meets the customer needs?
A. whether the hotel wants to deploy the APs as RAPs or CAPs
B. whether the hotel has CAT5e patch cables long enough to reach the boxes
C. whether directional or omnidirectional external antennas work better for the APs
D. whether the hotel already has a PoE or PoE+ source
Answer: D
