HP HPE0-J78 - Delta - Designing HPE Enterprise Storage and Backup Solutions Exam
Page: 2 / 10
Total 50 questions
Question #6 (Topic: )
A customer adds additional SSD drives to an HPE 3PAR StoreServ array configured with
Adaptive Flash Cache (AFC). Which action is needed to take advantage of the new drives
In AFC?
Adaptive Flash Cache (AFC). Which action is needed to take advantage of the new drives
In AFC?
A. Remove the old AFC configuration and recreate a new one
B. Run the statcache command to enable AFC tor an VVs on the system
C. increase the current AFC configuration to reflect the additional space
D. Run tunesys alter adding the drives to rebalance the system
Answer: A
Question #7 (Topic: )
A customer wants you to expand an HPE StoneVirtual cluster with two additional nodes.
What do you need to consider?
What do you need to consider?
A. Nodes must be of equal or greater capacity compared to the existing nodes in a cluster
B. The expansion needs downtime to re-balance the resources within the cluster
C. The new nodes must be configured into a new management group.
D. The firmware of the new nodes must match the version running in the duster before adding them
Answer: A
Question #8 (Topic: )
A customer requires a new HPE 3PAR Storeserv 8400-2N with the minimum number ol
drive enclosures to support Enclosure HA with 96 k 1.2 TB 10 K SAS drives, as well as a
physical service processor. The customer has their own data center racks with 9 U of
space left for the new array.
What should you do to comply with the installation best practices?
drive enclosures to support Enclosure HA with 96 k 1.2 TB 10 K SAS drives, as well as a
physical service processor. The customer has their own data center racks with 9 U of
space left for the new array.
What should you do to comply with the installation best practices?
A. Ask me customer to plan for an additional rack
B. Add a rack air flow optimization hit to the solution.
C. Install the array at the bottom or me rack
D. Move the service processor to a separate rack
Answer: D
Question #9 (Topic: )
A customer purchases an HPE StoreVirtuai array as part of a recommended solution. In
the customer's production environment, they are not opening close to the performance
benchmark shown during the proof of concept.
What should be done to optimize this array?
the customer's production environment, they are not opening close to the performance
benchmark shown during the proof of concept.
What should be done to optimize this array?
A. Peer Motion must be enabled tor redundancy between interfaces for load balancing within the LeltHand OS.
B. The failover manager should be installed in the same subnet, and the round-robin policy configured with the virtual IP.
C. The host muti-pathing should be upgraded to HPE Device Specific Module (DSM) for MPIO to support the round-robin with the LeftHand OS Virtual IP.
D. The management group must be configured with Network RAID 10 (two-way mirror) to get the best performance of array
Answer: C
Question #10 (Topic: )
Which HPE solution can be ready for production in 15 minutes and is applications and
virtual desktops?
virtual desktops?
A. HPE ConvergedSyslem 500 for HANA
B. HPE ConvergedSyslem 100 for Hosted Desktops
C. HPE ConvergedSysTem 700 for Citrix XenDesktop
D. HPE ConvergedSyslem 250-HC StoreVritual
Answer: D
