SPARC M6-32 and SPARC M5-32 Servers Installation Essentials v7.0 (1z0-489)

Page:    1 / 6   
Total 79 questions

You opened a console into PDom2 and you now want to get back to the SP. would you use?

  • A. ~.
  • B. ~# r
  • C. Esc-(
  • D. #.


Answer : D

Which three statements are true about PCIecard population on the SPARC M5-32 server?

  • A. Each DCU has two sets of PCIe slots. PCIe slots 1-8 are connected to IOB0, and PCIe slots 9-16 are connected to IOB1.
  • B. The order of PCIe card portion is the same in the OCU with 2x or 4x CMUs.
  • C. In a 4x CMU environment, PCIe slot 3 shares the same PCIe switch with the EMS (Base I/O board); the same is true for PCIe slots 6,11, and 14.
  • D. In 2x CMU environments, PICe slots 3 and 4 share the same PCIe switch with the EMS I/O board); the same is true for PICe slots 5 and 6, PCIe slots 11 and 12, and PCI slots 13 and 14.
  • E. In the DCU with 2x CMUs (in slots 0 and 3), you may only populated card to PCIe slots 1-8.


Answer : B,C,E

You have completed an OS installation in a PDom and, after subsequent reboots, you observe an error message regarding the pseudo- cdrom. Which command do you use to clear it?

  • A. clear faults
  • B. reset /HOSTx
  • C. boot -r
  • D. power off


Answer : C

Reference:
http://docs.oracle.com/cd/E19095-01/sfv890.srvr/817-3956-12/system_overview.html

You are at a customer site to install some new PCIe cards into their SPARC M5-32 platform. You want to ensure there are no existing issues on the platform before you begin your word. Which command would you run to see details of the existing problems on the platform?

  • A. show /System/Faults
  • B. show /Servers/open_ problems
  • C. Show /System/0pen_pr0blems
  • D. show problems


Answer : C

Reference:
http://docs.oracle.com/cd/E24355_01/html/E41214/z40001331392991.html

While planning for the installation of a SPARC M5-32 server, you notice that a more recent version of a patch is available than what is currently on the EIS-DVD. According to the
Enterprise Installation Standard (EIS) methodology, what should you do?

  • A. Always install the most recent version of patch.
  • B. Delay installation until the updated patch is published to the EIS-DVD.
  • C. Do not install the patch unless instructed to do so by an EIS Alert.
  • D. Never install patches outside of the EIS- DVD.


Answer : B

Assuming that HOST2 is composed of only DCU2, which two targets report the type of
CPUs that belong to this DCU?

  • A. /System/DCUs/DCU_2 cpu- summary
  • B. /System/Processor type
  • C. /Servers/PDomains/PDoma1n_2/System/Processors summary- description
  • D. /Servers/DCU_2/Processors model


Answer : A,D

Reference:
http://docs.oracle.com/cd/E19102-01/n810.srvr/819-2741-
10/subassembly_hot_replace.html

A customer reports that they have noticed an alert light on the CMU# 10. Which CPUs may be affected by issues within this CPU memory unit?

  • A. CPU#10, CPU# 11, CPU#12, CPU#13
  • B. CPU#22, CPU#23
  • C. CPU#20, CPU#21,
  • D. CPU#20, CPU=21


Answer : B

Reference:
https://docs.oracle.com/cd/E24355_01/html/E41214/bbgebhfe.html

The service processor collects audit and event records. The records can be used to show when certain actions occurred on the SPARC M5-32 platform. Which two commands list the event and audit log entries?

  • A. show /SP/logs/event/list
  • B. show /System/Log/audit
  • C. show /SP/logs/audit/list
  • D. show /Servers/Log/list


Answer : B,D

You are unable to add an Oracle ILOM user account. Which option represents a possible reason for this?

  • A. You need to add SSH keys to the system before creating additional user accounts.
  • B. You do not have the user management role enabled.
  • C. You do not have the host control role enabled.
  • D. You have exceeded the maximum number of 30 user accounts.


Answer : B

Reference:
https://docs.oracle.com/cd/E24355_01/html/E41214/bbgebhfe.html

You are connection serial and network cables to two SPs located at the front of the server.
Your customer has requested that you set this up to enable 1-GbE network speeds. Which action would you take?

  • A. Connect 32 CAT6A cables from the SPO and SP1 SER MGT RJ-45 ports to separate terminal devices.
  • B. Connect Category 5 cables from the SPO and SP1 SER MGT RJ-45 ports to separate terminal devices.
  • C. Connect Category 2 cables from the SPO and SP1 SER MGT RJ-45 ports to separate terminal devices.
  • D. Connect Category 6 (or better) cables and network devices that support 1000BASE-T networks to separate terminal devices


Answer : D

Reference:
https://docs.oracle.com/cd/E24355_01/html/E41214/z4000b7d1393076.html

You have used ILOM on other servers before, but notice that there are two targets that are new to ILOM on the SPARC M5-32 server. Which are they?

  • A. /System
  • B. /Storage
  • C. /Servers
  • D. /SYS
  • E. /sp


Answer : A,D

Reference:
http://docs.oracle.com/cd/E19469-01/820-6410-12/ilom_netconfig.html

There are 16x CMUs and 4x IOUs with up to 4x DCUs in a fully configured SPARC M5-32 server. The core interconnect component is Scalability Switch Board (SSB). How many
SSBs can there be in a fully configured server?

  • A. 16
  • B. 4
  • C. 20
  • D. 12


Answer : C

Which three statements are correct about the front control panel and rear status panel on the SPARC M5-32 server?

  • A. The front control panel and rear status panel are hot-swappable.
  • B. The Power On/Standby button is located only on the front panel, not on the rear panel.
  • C. The System Key switch is located only on the front panel, not on the rear panel.
  • D. An antistatic wrist strap connector can be found on both the front and rear panels.
  • E. All the control keys mo on the front control panel, and all the LED signals are on the rear status panel.


Answer : A,C,D

Reference:
http://docs.oracle.com/cd/E19095-01/sfv890.srvr/817-3957-12/dak_sm_preptoservice.html

A customer provides you with their NTP server information. In which two places do you need to configure it?

  • A. SP
  • B. SPP
  • C. OBP
  • D. Solaris


Answer : B,D

Use of the Enterprise Installation Standards (EIS) methodology provides a way to
_________

  • A. Create a framework for tracking improperly installed systems
  • B. Produce consistent, high-quality installations
  • C. Produce systems optimized for Oracle software departments
  • D. Create a framework for tracking properly installed systems


Answer : C

Page:    1 / 6   
Total 79 questions